Maintenance Electrician

Precision Castparts Corp. •

Irvine, California, United States

Position Type: Permanent

Job Description:
1

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability – not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Job Description 1

Position Summary:

Without supervision, the maintenance electrician perform advanced maintenance and repair tasks on electrical systems such as calibrating furnace controls, test instruments, and chart recorders, as well as conduct furnace pre-surveys. The electrician demonstrates advanced troubleshooting skills working with electrical equipment and systems such as VFD&39;s, burner systems and VAR systems. The maintenance electrician also provide leadership and mentoring to lower level maintenance electricians, and may be required to oversee licensed and contracted electrical work at the plant level.

Electrician is to be certified and able to complete tasks from low voltage, i.e., wiring a wall outlet to high voltage, i.e. wiring an 800 amp machine connection. Ability to read blueprints, and perform work in line with electrical building codes. Provides specific responsibility for identifying repair/replacement needs; installing, repairing and upgrading electrical system and equipment/ typically requires machine shop experience working with machines and their specific electrical needs.

Primary Duties & Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, ability and/or competency needed for successful performance in the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Comply with PCC Code of Conduct Requirements and all PCC Cardinal Rules (e.g., Quality and Safety).

All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures.
In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.
Work safely under functional safety guidelines such as PPE and equipment interaction.
Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables.
Tests malfunctioning machinery and discusses malfunction with other maintenance workers to diagnose malfunction and make required repairs.
Replaces faulty electrical components of machines such as relays, switches, and motors, and positions sensing devices.
Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards.
Troubleshoot and maintain control systems. This includes all electrical, hydraulic and pneumatic controls.
Troubleshoot and repair all AC and DC motors and controls, pressure sensing devices, voltage current, and resistance measurement devices.
Troubleshoot and repair plant lighting 480V, 277V and 110V circuits; 480V cranes; PLC based controls and relay logic circuits.
Knowledgeable about motor control
Monitor furnace status and light furnaces.
Trains and oversees electrical projects as directed by supervisory personnel.
Installs power supply wiring, conduit, and electrical apparatus for newly installed machines, equipment, and buildings.
Connects power supply wires to machines/equipment and connects cables/wires between machines/equipment.
Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables.
Pushes buttons and presses keys on controllers, teach pendant, and programmable controllers to program automated machinery to test for malfunctions, and to verify repairs.
Other duties as assigned.

Required Skills

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of employees of Company.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

Experience & Education

Must be able to work rotating shifts
Must hold a MA journeyman or a Master Electrician license
GED or High School diploma preferred but not required.

Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to airborne particles and vibration. The noise level in the work environment is usually moderate.

PCC Rollmet is an equal opportunity employer. The company&39;s policy and practice is to provide equal employment opportunities and to assure those opportunities, without regard to age, sex (including pregnancy, childbirth, breastfeeding or related medical conditions, gender, race, color, creed, national origin, ancestry, sexual orientation including gender identity or gender expression, religion, (including religious dress and religious grooming), mental or physical disability, legally protected medical condition, genetic information, marital status, military or veteran status, reproductive decision making, or any other status protected by applicable local, state or federal anti-discrimination laws.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

For informational purposes only, the range of pay for this role is $25.75 to $39.25 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 1X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company&39;s medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company’s 401(k) plan.

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. &39;Green Card Holder&39;), and certain categories of Asylees and Refugees.

Job Ident #: 11597

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Maintenance Electrician

Company Overview