JSfirm Maintenance Jobs

Aircraft AP Falcon Mechanic

Tue, 16 Mar 2010 18:54:00 CDT

Johnson Service Group, Inc. (JSG) East Alton, Illinois:
East Alton facility near St Louis, MO has immediate openings for Falcon Mechanics.

Production Manager � 1st Line Maintenance

Tue, 16 Mar 2010 17:29:00 CDT

Kay and Associates, Inc. UAE, International:
Job Scope Responsible for the management and coordination of the 1st line air base maintenance. Shall directly supervise Maintenance leads and technical workforce to ensure maintenance operations meet requirements. Must liaison with multiple departments to coordinate operation requirements.

SHEETMETAL MECHANIC - AL

Tue, 16 Mar 2010 16:21:00 CDT

A.M.E. MOBILE, Alabama:
A.M.E. is currently looking for sheetmetal mechanics to become part of its selected group of aviation technicians.
We have long term jobs in Mobile, AL. For adittional information please contact Lilly Di Muro at (305)863-8638 or email us your resume to ldimuro@ame-miami.com
$1000 BONUS

INTERIOR MECHANIC - AL

Tue, 16 Mar 2010 16:21:00 CDT

A.M.E. MOBILE, Alabama:
A.M.E. is currently looking for interior mechanics to become part of its selected group of aviation technicians.
We have long term jobs in Mobile, AL. For adittional information please contact Lilly Di Muro at (305)863-8638 or email us your resume to ldimuro@ame-miami.com

A&P MECHANIC - AL

Tue, 16 Mar 2010 16:20:00 CDT

A.M.E. MOBILE, Alabama:
A.M.E is looking for experienced and licensed A&P mechanics. We are offering long term positions in Mobile, AL. Openings are filling quickly so call Lilly Di Muro at (305)863-8638 or email your resume to ldimuro@ame-miami.com

C-130 Jet Engine Maintenance Technician

Tue, 16 Mar 2010 15:50:00 CDT

TS Government Solutions Saudi Arabia, International:
KNOWLEDGE/EDUCATION Knowledge of procedures involved with the inspection, removal, disassembly, testing servicing, troubleshooting, modification, repair and replacement of modular components and related systems for GTC/APU and T56/D22A engines is mandatory. Must have the ability to work unassisted in all sections of the Engine Shop. Must be able to teardown and recondition QEC Kits, perform modular replacement of engine compressors and turbines, and build-up T56/D22A engines. Completion of T56 Engine Basic Engine technical School is desirable. Must have working knowledge of aircraft maintenance forms, records and reports to meet the job standards prescribed by the RSAF. Must be able to speak, read, comprehend and write English clearly and distinctly. Completion of high school or equivalent is mandatory. Must be qualified and capable of providing necessary job training to the Customer.

Sheet Metal, Structural Helicopter Mechanics-Mcminnville, OR

Tue, 16 Mar 2010 15:35:00 CDT

PlaneTechs McMinnville, Oregon:

Sheet Metal, Structural Helicopter Mechanic

Overview:

Sheet Metal, Structural Mechanics needed for Structural work on Helicopters.
Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.

Sheet Metal, Structural Aircraft Mechanics-Tucson, AZ

Tue, 16 Mar 2010 15:35:00 CDT

PlaneTechs Tucson, Arizona:

Sheet Metal, Structural Aircraft Mechanic

Overview:

Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.

Sheet Metal, Structural Aircraft Mechanics-Detroit, MI

Tue, 16 Mar 2010 15:34:00 CDT

PlaneTechs Detroit, Michigan:

Sheet Metal, Structural Aircraft Mechanic

Overview:

Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.

Sheet Metal, Structural Aircraft Mechanics-Huntsville, AL

Tue, 16 Mar 2010 15:34:00 CDT

PlaneTechs Huntsville, Alabama:

Sheet Metal, Structural Aircraft Mechanic

Overview:

Document maintenance performed on required forms.
Must be able to accomplish any and all repairs, modifications, E.A.�s, etc, with very little to no assistance.
Must be able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs.
Must be able to fabricate parts.
Perform maintenance IAW FAA approved technical data.
Research FAA technical data to locate applicable data relevant to assigned task.
Repair body or structure of aircraft according to specifications.
Reinstalls repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations.
Locates and marks dimension and reference lines on defective or replacement part, using templates, scribes, compass, and steel rule.
Cures bonded structure, using portable or stationary curing equipment.
Communicates with other workers to fit and align heavy parts or expedite processing of repair parts.
Cleans, strips, primes, and sands structural surfaces and materials prior to bonding.
Repairs or fabricates defective section or part, using metal fabricating machines, saws, brakes, shears, and grinders.
Removes or cuts out defective part or drills holes to gain access to internal defect or damage, using drill and punch.