JOB DESCRIPTION Job Title: Inspector Department: OSC QC CF6 Engine Shop - 2nd ShiftReports To: Inspection Supervisor SUMMARY: Inspect aircraft and components for discrepancies. Inspect and evaluate work performed by mechanics, sheet metal mechanics, and avionics technicians to ensur
JSfirm
Inspector CF6 Engine Shop - Second Shift
Job Description:


JOB DESCRIPTION

Job Title: Inspector

Department: OSC QC CF6 Engine Shop - 2nd Shift

Reports To: Inspection Supervisor

SUMMARY:

Inspect aircraft and components for discrepancies. Inspect and evaluate work performed by mechanics, sheet metal mechanics, and avionics technicians to ensure the proper rework of discrepancies.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Duties and responsibilities include, but are not limited to:
  • Review the scope and detail of inspection requirements and inspect aircraft and components by obtaining and interpreting work cards. Complete a visual inspection of aircraft areas opened by mechanics, including by not limited to fuel tanks, empennage, cargo areas, under floor areas, fuselage skin, engines, pylons, wings, flight control surfaces, flight decks, and landing gear.
  • Identify non-routine work on aircraft systems, including but not limited to engine performance, pneumatic/hydraulics, pressurization, air conditioning, electrical, fuel and flight controls. Identify the location of discrepancies by using fuselage body stations and butt lines.
  • Interpret and ensure compliance with all maintenance manual instructions, airworthiness directives, service bulletins, and fleet campaign directives.
  • Ensure that safety procedures are followed and potential damage to company property is minimized by overseeing aircraft handling activities, including but not limited to jacking, fueling, defueling, and towing.
  • Perform a receiving inspection for new and continued service parts to ensure serviceability, including but not limited to verifying certification from the manufacturer or overhaul facility, and inspecting for shipping damage. Maintaining control and inventory for the QC Bond quarantine cage, including submitting reports of Suspected Unapproved Parts (SUPs) to the Director of Quality Control.
  • Conduct a weight and balance analysis by using approved maintenance manuals and scales.
  • Ensure completion of logbook entries and release the aircraft as airworthy for test flight or flight operation checks.
  • Ensure compliance with all applicable FAA regulations during the course of day to day assignments.
  • Perform visual and dimensional inspections of articles, and determine serviceability and/or repair requirements by obtaining, reviewing, and interpreting inspections requirements.
  • Ensure proper rework of discrepancies by inspecting and evaluating work performed by shop mechanics / technicians.
  • Ensure completion of maintenance entries and work records for all articles inspected.
  • Perform any other duties as assigned by the Inspection Supervisor or Senior Inspector.
  • Requires travel, individual must be willing to travel.

SUPERVISORY RESPONSIBILITIES:

This job has no supervisory responsibilities.

QUALIFICATIONS:

Minimum qualifications to qualify for an Inspector position are as follows:

  • Hold both an Airframe and Powerplant certificate for a minimum of 3 years.
  • Have at least 2 years of experience maintaining the same category and class of aircraft used by Kalitta Air.
Must have adequate documented training to substantiate qualifications.

EDUCATION and/or EXPERIENCE:

Minimum qualifications to qualify for an Inspector position are as follows:

  • Hold both an Airframe and Powerplant certificate for a minimum of 3 years.
  • Have at least 2 years of experience maintaining the same category and class of aircraft used by Kalitta Air.
Must have adequate documented training to substantiate qualifications.

LANGUAGE SKILLS:

The ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to convert between different units of measure. Ability to compute rate, ratio, and percentage.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to stand, walk, sit, climb/descend stairs, and bend.

The Company can make reasonable accommodations to enable individuals with disabilities to perform the essential functions.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Working where the aircraft is located either inside the hangar or outside on the ramp. Subjected to occasionally low - high noise levels.

ACCOMMODATIONS:

If you need reasonable accommodation for the online application process due to a disability, please call (734) 544-7010. Please include your contact information and details about posted position of interest. Only inquiries regarding assistance for those who need accommodation with the online application process due to a disability will be returned.

**if you cannot apply online, other accommodations can be made**

**Must be authorized to work in the United States**

Company Details
Kalitta Air
818 Willow Run Airport
Ypsilanti, Michigan 48198 USA
www.kalittaair.com/careers
95 Open Jobs Available
Kalitta Air is where you come to find a career in aviation. From seasoned professionals to fresh new talent, there’s a place for everyone on the Kalitta team.

Benefits:
Basic Benefit Options for Full Time Employees Medical, Dental, Vision and Prescriptions / Free Short Term Disability for all full time employees / Free Company Sponsored Life Insurance / Voluntary Long Term Disability / 401K Benefits Company match 5% / Flex Spending (FSA): Medical and Dependent Care

Supported Manufacturers:
Boeing

Supported Models:
B737, B747, B767, B777
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)
Job Info
Location
Oscoda, Michigan, United States
Type
Permanent
Company Details
Kalitta Air
818 Willow Run Airport
Ypsilanti, Michigan 48198 USA
www.kalittaair.com/careers
95 Open Jobs Available
Kalitta Air is where you come to find a career in aviation. From seasoned professionals to fresh new talent, there’s a place for everyone on the Kalitta team.

Benefits:
Basic Benefit Options for Full Time Employees Medical, Dental, Vision and Prescriptions / Free Short Term Disability for all full time employees / Free Company Sponsored Life Insurance / Voluntary Long Term Disability / 401K Benefits Company match 5% / Flex Spending (FSA): Medical and Dependent Care

Supported Manufacturers:
Boeing

Supported Models:
B737, B747, B767, B777

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2025 JSfirm