Press Shop Mechanic - Toronto
HSGI, Inc. •
PRESS SHOP MECHANIC 696-5 (695, 565, 214)
up and operate any drop hammer to produce single or double curvature work with
or without the use of pressure and/or rubber plates. Develop the use of
pressure and/or rubber plates for new parts. Do all necessary hand forming and
to perform the operations necessary to set up and operate a Dualform
double-acting hydraulic press embodying the Dualform Process to produce various
types of sheet metal pressings. As required, performs the operations necessary
to clean up and dress dies, punches, sample parts and/or pressings pertaining
to the work.
occupation requires a thorough knowledge of stretching aluminum alloy strip
sheets and formed sections around dies. Must be capable of tool proving, first
up and operates a Farnham Roller. In addition performs all first off work and records
the machine setting on a chart form.
up and operate a Buffalo Rolls. Check work to templates, blueprints and
drawings. Perform all necessary hand work to complete parts according to loft.
to determine sequence of operations and set up dies for trial and develop
blanks and run off material from accepted dies.
up from charts provided and operates a forming machine known by the trade name
Farnham Roller to form bends or curves in sheet metal, adjusting the machine
rollers to obtain bends according to template, blueprint or drawing
to set up and operate Hufford Presses on production runs.
to set up and operate a Stretch Press.
the planning, set up and forming of all types of sheet metal stock common to
aircraft manufacture, by setting and aligning various dies and forms and
bending, joggling, channeling, corrugating or forming of angles, including the
calculation of bend allowances. Requires a basic knowledge of die construction
to install dies and forms by placing, aligning, adjusting dies and forms in
brake presses, and to produce work containing bends, joggles, channels and
to set up and operate any of the following machines; router, nibbler, draw
bench, slitting shear, rubber press, deburring machine, drills, straightening
operating a travel router, the operator will be paid a premium of twenty (20)
cents per hour for all hours so assigned.
have ability required to finish sheet metal parts by a hand forming operation
using form blocks to be supplied. May be required to operate a crimping
classification independently dresses or redresses parts from presses formed on
unapproved tools. Requires knowledge of set up, planning, forming, materials,
bend allowances and operations, etc. appropriate to do the function. This
classification will be used only as required in the development of new form
by use of blueprints, drawings or verbal instructions, to lay out work and
complete drilling operations on sheet metal parts.
to set up and operate the machine, including the welding attachment and have
complete knowledge of speeds, feeds and types of blades employed on different
types of material.
Knowledge of Bombardier Series Aircraft including Business, Corporate, and Regional Aircraft
Paid Hotel and Car
Job Ident #:
Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC