Must be capable of setting up and operating ultrasonic and other necessary equipment
and materials or parts to be tested, in order to check for internal and
external flaws. This includes selecting proper crystals, hooking up and
calibrating equipment and positioning parts in a manner that will permit proper
orientation of part with search unit.
Must be capable of operating ultrasonic equipment to check for internal and external
flaws using prepared ultrasonic technique inspection instructions. Required to
accept or reject according to material acceptance standards as a result of
ultrasonic inspection findings. Required to inspect and approve using all
inspection equipment necessary, material defects by the Magnetic Particle
Inspection method. This involves use of magnetizing and demagnetizing
Required to inspect and approve using all inspection equipment necessary, material
defects by the Penetrant Inspection method.
All crack detection methods must have R.C.A.F. approval.
Must be capable of setting up the Eddy Current equipment used in detecting flaws in
materials. Required to implement the necessary calibration of the equipment as
required for testing, and selecting the proper probes for testing and to
implement testing as per written techniques or as instructed by the NDT Level
Must interpret, evaluate and document test results.
Required to complete all necessary inspection reports and documents related to the fore
mentioned and to have a complete knowledge of all required procedures.
Must pass certification examinations per each test method:
Magnetic Particle Inspection
Eddy Current Inspection
Must meet the vision requirements of the government specification.
Must assist in the training of less skilled workers.
Email resume to Mandy@hsgi-inc.com
Or Call me at 682-215-8506