Combat Systems Installation Engineer - AEGIS
Lockheed Martin •
Position Type: Permanent
Job Description:
Description:At Lockheed Martin Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future!
Ship Integration and Test Installation and Combat System Installation Engineer:
Waterfront Installation Engineer at repair shipyards overseeing installation of ACB12/16 Combat System upgrades during Aegis Modernization and PSA availabilities on US AEGIS DDG and CG Class ships.
Responsible for reviewing detail design drawings, conducting installation inspections of the AEGIS CG-47 and DDG-51 Class Ship combat systems equipment and related support systems equipment.
Provide assistance/resolution to Engineering, Detail Design, and Field Engineering Groups (Lockheed Martin, Government, and Government Contractors) related to equipment installation and design issues.
Troubleshoots technical problems and issues, determines technical solution in accordance with product and customer specifications, and recommends actions to company or customer representatives for coordinative product solution.
Liaise with CG & DDG Planning Yards on development of Combat System Technical Data Packages.
Conducts technical analysis of product implementations, modifications and enhancements to product in accordance with specific customer specifications and implementations.
Assesses product needs in accordance with customer specifications. Conducts technical training and product briefing with customers, vendors and company representatives.
Witness the shipboard load-outs of combat systems equipment.
Conduct inspections of combat system equipment and cabling during installation to identify problems and provide solutions.
Participate in design reviews and provide installation and operational support for the Combat System Support Equipment (e.g., demineralized cooling water, chilled water, sea water, electronic dry air, PAO, 400Hz, etc.).
Install equipment ORDALT upgrades and remove products ensuring coordinative engineering field change completion on AEGIS Weapon System.
Acts as local on-site representative to customers organization.
Strong analytical and problem solving skills.
Position requires up to 40 temporary and extended duty travel to Moorestown, NJ; Norfolk, VA / San Diego, CA; Mayport, FL; Bath, ME; Pascagoula, MS; Pearl Harbor, HI; Yokosuka, Japan.
This position requires shift work, brief at-sea periods and periodic travel supporting fleet emergent requirements and equipment installation events and issues. The position will require working flex hours, overtime, and on occasion weekends and holidays.
Basic Qualifications:
• This position requires up to 50 travel per year.
• Minimum 2 years experience in design, integration, and/or installation engineering with knowledge of CG 47, DDG 51, and/or FMS Aegis or other USN surface ship combat system equipment and land site simulators.
• Knowledge of Military Specifications and Standards related to bonding and grounding of equipment on Navy Ships, MIL-STD-1310, MIL –STD-1399, MIL-STD-901D (shock), and ship cooling systems/components.
• Familiarity with the US Navy Joint Fleet Maintenance Manual (JFMM) and NAVSEA Technical Specification 9090-310 - Ship Alteration Accomplishment by Installation Teams
• Familiarity with the latest applicable Military Specifications for electrical and optical cable, connector, backshell, and system design, integration, and integrity testing
• Position requires good verbal and written communication skills, strong initiative characteristics, and exceptional teaming skills. Position requires ability to work in a diverse corporate/cultural team environment. Candidate will interface daily with NSWC-PHD, MDA, PEO IWS, Shipyards, State and local safety officials, Regional Maintenance Centers, and USN Ships’ force
• Ability to obtain and maintain a DoD SECRET security clearance, which requires U.S. citizenship
Desired Skills:
BS in Electrical, Industrial, or Mechanical Engineering preferred
• Preferred Knowledge of interface protocols, system design criteria, equipment interactions, major signal flows, and USN Shipbuilding Specifications. Ability to read and comprehend production drawings. Ability to read and comprehend military specifications for electrical and optical cable, connectors and backshells, and system design, integration and integrity testing
• Prior experience with Alteration Installation Team (AIT) installation and/or testing of BMD 3.6 and 4.0 upgrades on Aegis CG and DDG class ships
• Prior experience as an installation engineer in ship repair facilities or equivalent industrial environments
• Prior experience with equipment engineering change installation (Field Changes, Engineering Changes, ORDALTs, SHIPALTs, Field Modification Bulletins)
• Prior operational experience in the Aegis fleet. Experience with Cable (both copper and fiber) fabrication and testing
• Experience with soldering and wire wrap techniques
• Certifications a plus
• Experience in one or more of the following Aegis systems: SPY-1 Radar, MK 99 FCS, MMSP, BSP, and WDRC
• Experience with ship support systems (HP/LP Air, dry air, 400Hz SSFC Systems, CND/SPY/Sonar Cooling Systems)
• Experience with providing technical leadership and working in a multi-organization team to accomplish a common goal
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: Non- standard 40 hour work week as assigned by leader
Pay Rate:
The annual base salary range for this position in California and New York (excluding most major metropolitan areas), Colorado, or Washington is $58,200 - $111,600 . Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidates work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
(Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year.
This position is incentive plan eligible.
Pay Rate:
The annual base salary range for this position in most major metropolitan areas in California and New York is $67,000 - $126,100. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/ training, key skills as well as market and business considerations when extending an offer.
Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays.
This position is incentive plan eligible.
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: RMS
Relocation Available: No
Career Area: Mechanical Engineering
Type: Full-Time
Shift: First
BS in Electrical, Industrial, or Mechanical Engineering preferred
• Preferred Knowledge of interface protocols, system design criteria, equipment interactions, major signal flows, and USN Shipbuilding Specifications. Ability to read and comprehend production drawings. Ability to read and comprehend military specifications for electrical and optical cable, connectors and backshells, and system design, integration and integrity testing
• Prior experience with Alteration Installation Team (AIT) installation and/or testing of BMD 3.6 and 4.0 upgrades on Aegis CG and DDG class ships
• Prior experience as an installation engineer in ship repair facilities or equivalent industrial environments
• Prior experience with equipment engineering change installation (Field Changes, Engineering Changes, ORDALTs, SHIPALTs, Field Modification Bulletins)
• Prior operational experience in the Aegis fleet. Experience with Cable (both copper and fiber) fabrication and testing
• Experience with soldering and wire wrap techniques
• Certifications a plus
• Experience in one or more of the following Aegis systems: SPY-1 Radar, MK 99 FCS, MMSP, BSP, and WDRC
• Experience with ship support systems (HP/LP Air, dry air, 400Hz SSFC Systems, CND/SPY/Sonar Cooling Systems)
• Experience with providing technical leadership and working in a multi-organization team to accomplish a common goal
Job Ident #:
61286160848
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)