Part Maker

First Shift: 7:00am - 3:30pm

Compensation: $20.00/h - $24.00 *dependent on experience* + Quarterly Bonus and Overtime eligibility

PURPOSE:

The Part Marker is responsible for accurately identifying and labeling castings with required serial numbers, heat/lot numbers, and other traceability information. This role uses a combination of computerized spaning programs, mechanical stamping/engraving equipment, and occasional hand scribing to apply permanent and legible spanings in accordance with customer specifications and internal procedures. The Part Marker also supports inspection-related tasks such as handling NDT samples, verifying spaning quality, and performing or assisting with hardness testing to ensure compliance with aerospace standards.

ESSENTIAL JOB FUNCTIONS:

• Apply permanent identification spanings (serial numbers, heat/lot numbers, part numbers, and other required codes) to castings and aerospace parts per work instructions, customer requirements, and internal procedures.
• Operate computer programs and spaning equipment (e.g., dot peen, etch/engrave systems, stamping tools, or other spaning methods) to produce consistent, legible, and compliant spanings.
• Perform hand scribing when required, ensuring spanings meet readability and depth standards without damaging part surfaces.
• Maintain part traceability by verifying and recording correct part identity, serial number assignments, and spaning documentation throughout the workflow.
• Assist with creation and updates to spaning instructions/cards (spaning card instructions) including placement, orientation, character size, and method requirements.
• Properly handle and segregate NDT samples and welds, ensuring correct identification, separation, and protection from damage or mix-ups.
• Visually inspect castings and components for defects, spaning issues, or nonconformances and notify appropriate personnel when abnormalities are found.
• Perform or assist with hardness testing per procedure, when required, and ensure results are documented and traceable to the correct part.
• Properly care for and maintain spaning tools and stamps, ensuring equipment is clean, serviceable, and stored correctly to prevent wear or damage.
• Follow departmental procedures and safety requirements, including proper PPE use and careful handling of aerospace components.
• Support continuous improvement efforts by identifying recurring spaning issues, suggesting process improvements, and maintaining a clean and organized work area.
• Performs other related duties, responsibilities, or tasks of equal or lesser skill as assigned to support department operations.

SPECIAL SKILLS AND PHYSICAL REQUIREMENTS:

• Ability to read and follow work instructions, spaning specifications, shop travelers, and drawings.
• Strong attention to detail and the ability to maintain accuracy in serial number and traceability systems.
• Comfortable working with computer-based programs and operating shop equipment.
• Ability to perform visual inspections and recognize spaning defects (incorrect characters, poor depth/contrast, misplacement, etc.).
• Understanding of basic aerospace traceability requirements (lot/heat/serial control and segregation practices).
• Ability to use measuring/verification tools as needed (e.g., depth verification, visual comparators, etc.).
• Good communication skills and willingness to escalate discrepancies quickly.
• Ability to wear required PPE, including eye protection, hearing protection, gloves, and respirators when necessary.

REPORTING RELATIONSHIPS:

• Reports directly to the Xray Supervisor

EDUCATION AND EXPERIENCE:

• 1 year of manufacturing experience preferred; foundry or metals-processing experience is a plus.
• Demonstrated ability to comprehend and apply ordinary arithmetic, decimals, and fractions in daily work tasks.