A&P Mechanic - ID:2130036706 - Macon, GA

Type of aircraft: Embraer
Longevity: Long Term
Type of work environment: MRO

Summary:

• Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems, pneumatic systems, plumbing, precision assemblies, rigging and controls, etc.
• Determines when a component should be repaired or replaced; decides upon necessary repair scheme, quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
• Repairs, reworks, and modifies worn or defective assemblies, making alterations or changes to units when necessary.
• Follows approved maintenance procedures for subject component or system, consulting internal procedures that have been FAA approved, original equipment manufacturer's (OEM's) technical data, and work package instructions.
• Consults the Maintenance Lead if technical assistance is needed during the repair process.
• Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
• Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
• Completes work package documentation by signing/stamping after finishing all designated operations.
• Submits completed/in-progress work to Maintenance Lead for review; submits to Quality Assurance for final/in-progress inspection and re-certification of airworthiness.
• Provides supervisor with performance statistics and other operational data, as requested.
• Properly accounts for time and materials used in all inspection and maintenance activities.
• Comply with repair station procedures (RSM /QCM) and company policies (SOP) when performing aircraft or component maintenance.

Tools required: Yes
Years’ experience: 3-5 years
License requirements: A&P Required

Specific experience required:

Minimum of 3 years experience in a MRO setting as an A&P Mechanic

Knowledge, Skills & Abilities:

• Assignments require Standard Knowledge of a Technical Area.                                                                   
• Rapid learning and application of new information and concepts within the Technical Area begins to take place at this level.
• Performs moderately complex Technical Assignments.                                                                                        
• Assists Advanced Level Technicians on more complex technical assignments
• Knowledge of machines and tools, including their uses, repairs and maintenance
• Knowledge of principles and processes for providing customer service.
• Skilled with repairing, troubleshooting, installing and equipment maintenance.
• Knowledge of FAA requirements for aircraft maintenance procedures
• Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.  

Working Conditions / Environment/  Special Requirements

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
• Ability to work flexible hours and different shifts if required
• Employees will be subject to the random drug and alcohol testing under FAA regulations
• As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
• Tools must satisfy minimum tool list.
• Valid Drivers License.
• Must be able to work in hot/Cold – Indoor/Outdoor.
• Must be able to lift up to 50 lbs unassisted.
• Must be able to do work above head.
• Must be able to work at heights.
• Must be able to work in confined spaces.
• Must be able to climb.

Education:  

• High School/ GED
• A & P License required