Aircraft Structural Mechanic I

Job Description:

Description:

You will be an Aircraft Structural Mechanic. Our team is committed to delivering exceptional results, and were looking for a highly skilled and experienced Aircraft Structural Mechanic to join our team.

What You Will Be Doing

As an Aircraft Structural Mechanic, you will be responsible for:

•The Aircraft Structural Mechanic is responsible for modifying, repairing, and maintaining the structural configurations of H‑6, H‑60, and H‑47 rotary‑wing aircraft. You will execute scheduled and unscheduled inspections, structural repairs, and modifications on airframe structures and components, ensuring compliance with airworthiness standards and supporting mission‑critical operational readiness.
•Perform high‑complexity modifications to frames, beams, fuselage, wings, tail assemblies, landing‑gear attachments, doors, and hatches using riveting, fastening, trimming, sanding, bonding, and composite repair techniques.
•Lead inspections for structural damage, corrosion, cracks, and other defects; execute removal, treatment, and preventative programs; provide technical guidance to junior mechanics.
•Fabricate, install, and replace sheet‑metal and composite panels, fairings, and structural components per engineering drawings and service bulletins.
•Conduct and certify phase, isochronal, and periodic inspections; identify early‑life‑limit concerns and recommend corrective actions.
•Interpret engineering drawings, repair manuals, structural repair schemes, and service bulletins; ensure accurate entry of work in maintenance logs, modification/production instructions, and military documentation systems.
•Lead rigging tasks to verify proper alignment of airframe assemblies and control surfaces after repairs or modifications.
•Perform final QA checks, verify compliance with airworthiness standards, and release aircraft for flight.
•Provide structural repairs in both flight‑line and depot environments; coordinate with depot shops for major repairs and back‑shop support.
•Train, mentor, and supervise Level I Aircraft Structural Mechanics; allocate work, review technical data, and ensure safety compliance.
•Adapt to shift variations, travel, and deployment requirements; support multiple aircraft types as mission needs dictate.

Why Join Us

This position supports our Special Operations Forces – Global Logistics Support Services contract, which is the U.S. Special Operations Commands (USSOCOM) largest service contract vehicle providing a wide range of tailored logistics, maintenance, and sustainment services. Learn more here: SOF GLSS

Further Information About This Opportunity:

This position is in Lexington. Discover more about our Lexington, Kentucky location.

MUST BE A U.S. CITIZEN – This position is located at a facility that requires special access and is in direct support of a U.S. government contract that requires a company-sponsored clearance to start.
Basic Qualifications:
Basic Qualifications
1. Aircraft Composites Knowledge – Proficient in aviation composite repairs, modifications, and installations.
2. Maintenance Documentation – Ability to accurately record repairs, inspections, and modifications in maintenance logs, modification and production instructions, and military documentation systems.
3. Quality Assurance – Demonstrated skill in verifying completed work against airworthiness standards and mission requirements.
4. Depot Maintenance Support – Capability to execute structural repairs at both flight‑line and depot levels.
5. Operational Flexibility – Ability to work in team environments, independently, and adapt to shift changes, travel, or deployment.
Desired Skills:
Demonstrated experience in composite material fabrication, inspection, and repair.

Proficiency with composite layup techniques, including wet layup, pre-preg, and vacuum bagging.

Knowledge of bonding, curing, and finishing processes for composite structures.

Ability to perform structural and non‑structural composite repairs in accordance with technical manuals and industry standards.

Familiarity with NDT methods (e.g., ultrasonic, tap test) for composite damage assessment.

Skilled in tooling, trimming, and fitting composite components to precise tolerances.

Understanding of safety protocols and handling procedures for composite materials, adhesives, and resins.

Experience documenting repair processes and quality assurance checks to meet compliance requirement
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CTRL (S0806)
Relocation Available: No
Career Area: Manufacturing
Type: Task Order/IDIQ
Shift: First

Demonstrated experience in composite material fabrication, inspection, and repair.

Proficiency with composite layup techniques, including wet layup, pre-preg, and vacuum bagging.

Knowledge of bonding, curing, and finishing processes for composite structures.

Ability to perform structural and non‑structural composite repairs in accordance with technical manuals and industry standards.

Familiarity with NDT methods (e.g., ultrasonic, tap test) for composite damage assessment.

Skilled in tooling, trimming, and fitting composite components to precise tolerances.

Understanding of safety protocols and handling procedures for composite materials, adhesives, and resins.

Experience documenting repair processes and quality assurance checks to meet compliance requirement

Job Ident #: 88608757632

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Lexington, Kentucky, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/