The LUH-72A MTP - Maintenance Test Pilot (LUH-72A) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications. Perform test flights and demonstrating aircraft proficiency upon completion of

LUH-72 Maintenance Test Pilot (LUH-72 MTP) Barstow-Daggett, CA.

Amentum • 
Daggett, California, United States
Position Type: Permanent
Job Description:

The LUH-72A MTP - Maintenance Test Pilot (LUH-72A) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications.

  • Perform test flights and demonstrating aircraft proficiency upon completion of aircraft maintenance or modifications on aircraft. 

  • Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a mission or sortie.

  • Compute weight and balance logs for the aircraft being flown.

  • Initiate and complete all military flight or maintenance forms to document maintenance test flight completion and discrepancies. 

  • Communicate, troubleshoot, advise and work side by side with military pilots and technicians. File flight plans for all flights using authorized navigational processes.

  • Determine in accordance with publications and procedures the airworthiness of aircraft prior to release for flight. Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks.

  • Perform recovery flights and ferries aircraft to additional sites, such as depots.

  • Perform troubleshooting procedures of aircraft on the ground and during flight and makes appropriate write-ups or gives verbal instructions to correct deficiencies.

  • Run-up aircraft for alert status to perform test on modifications.

  • Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a sortie and files a flight plan for all flights using authorized processes.

  • Ferry flights as assigned.

  • As qualified may perform as site safety specialist (only for the site where the Chief Pilot resides) and/or additional duties safety officer functions.

  • Must be capable of Aircraft Technical Inspection (TI) as additional duty.

  • May support AS9100-AS9110 internal audits, corrective action requests, assist section, department, and/or program in developing plans to correct identified shortfalls and may assist with continual improvement initiatives.

  • As qualified may perform Aviation Safety Official duties as directed.

  • As qualified may perform Chief or Lead pilot duties as designated by the Site Supervision.

  • Deploy when required to support contract requirements when maintenance test flights are anticipated.

  • Perform other qualified duties as needed.

Minimum Requirements

  • High School Diploma or GED Equivalent is Required.

  • Minimum of Ten (10) years of aviation maintenance experience is required.

  • A minimum of 1000 Hours of Pilot in Command time is preferred. 

  • 1,000 or more hours of total flight time with 300 hours in the same aircraft and type and 100 hours in the assigned aircraft LUH-72, and 50 hours as PC/1st Pilot in LUH-72A is required.

  • Must be proficient in flying operations of the (LUH-72 A) aircraft and have completed a proficiency check within the previous 12 months.

  • Must meet the qualification requirements of AR 95-20. Successfully completed Army Maintenance Test Pilots Course (MTPC) or complete an equivalency evaluation IAW AR 95-1 and 95-20.

  • Successfully completed the US Army Aircraft Maintenance Officers Course (AMOC) Phase II or complete an equivalency evaluation IAW AR 95-1 and 95-20.

  • Possess an instrument rating on their FAA Commercial License.

  • Possess a current valid Army Upslip or FAA Class II Medical Certificate. Successfully complete initially and annually thereafter a FAA Class II flight physical.

  • Must meet the experience requirements of AFR55-22, NOTAMS, AR95-10, AR95-20 and DCMA-8210 pertaining to each aircraft prior to acting in the capacity of pilot-in-command on maintenance test flights. Completed military flight and applicable training courses as required IAW 95-20

  • Must be able to work any shift as assigned by the Union.

Clearance Requirements:

  • Must be able to obtain and maintain a SECRET Security Clearance US Government Clearance. US Citizenship is required to obtain a secret clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required for facility credentials/authorization at this work location.

Preferred/Physical Qualifications:

  • Demonstrated proven and verifiable aviation experience including ethics, ability and professionalism of the highest standards are required for this position.

  • Must have demonstrated communication skills, both oral and written.  Must be fluent in the English language.

  • Working knowledge for operating navigational and communication equipment installed on the aircraft.

  • Capable of computing and annotating weight and balance logs for the aircraft.

  • May be exposed to extreme noise from turbine and jet engine aircraft.

  • May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts and vehicles.

  • May be exposed to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.

  • Must be able to distinguish color and judge three-dimensional depth.

  • Must be able to see aircraft in flight, read dials/gauges, identify small objects and hand tools.

  • Must be physically capable of climbing vertical ladders or built-in aircraft steps to heights of 10-12 feet.

  • May be exposed to chemical mist, gas, vapors, ultra-violet and infrared radiation.

  • May be required to lift to 50 pounds to a height of four (4) feet and be required to lift to 20 pounds to a height of seven (7) feet.

  • May be exposed to certain obstructions on the surface as well as ladders, stairs, etc.

  • May be exposed to rapid or extreme temperature changes.

  • May be required to travel domestically and internationally on short notice, to austere environments, under harsh living conditions.

California:  Compensation & Benefits:

HIRING SALARY RANGE: $115,523.20 - $55.54 an Hour (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant internal equity, and alignment with market data.)

This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: www.amentumcareers.com

 

       

Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.

Labor Law Posters

EEO including Disability/Protected Veterans

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm