AH-64 Quality Control Inspector (AFM-West FT Hood)AH-64 Experience preferredTools are RequiredShall have five years of recent applicable aircraft maintenance experience. Shall have at least one-year experience inspecting AH-64 aircraft assigned. Shall possess a Federal Aviation Administration (FAA)

QC Inspector II (AH-64)

DynCorp • 
Killeen, Texas, USA
Position Type: Contractor
Share
Job Description:

AH-64 Quality Control Inspector (AFM-West FT Hood)

AH-64 Experience preferred
Tools are Required
Shall have five years of recent applicable aircraft maintenance experience.
Shall have at least one-year experience inspecting AH-64 aircraft assigned.
Shall possess a Federal Aviation Administration (FAA) Airframe and Power plant License (FAA A&P).

If no A&P, shall have a minimum five year experience as an aircraft inspector on the AH-64 airframe they will be inspecting.
Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the AH-64 (MDS) airframe they will be inspecting.

Back shop TI shall have at least one year experience on components being inspected.

 
Job Requirements:

The QC Inspector II inspects the repair and modification of aircraft structures, structural components and engines of complex to extreme difficulty.


Principal Accountabilities
Plans, conducts, and supervises aircraft technical inspections.
Inspects and evaluates repairs and modifications to aircraft structures, structural components and engines.
Inspects and evaluates maintenance of aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.
Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions.
Applies technical expertise in restoring equipment condition and operation.
Participates in maintenance test flights and operation checks as required.
Ensures compliance with aircraft configuration control, oil analysis Program and test measuring diagnostic equipment calibration.
Provides lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.
Contributes input to development and implementation of quality control and ground safety programs to ensure compliance with contract specifications.
Inspects and verifies proper completion and documentation of safety and flight discrepancies.
Must be able to lead small groups independently and provide oversight updates to the program leadership.
Perform other qualified duties as required.

Knowledge & Skills
Broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and technical publications.
Working knowledge of aircraft safety requirements and how to operate portable firefighting equipment.
Ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications.
Exceptional communication skills, leadership abilities, and personnel management skills are required.
Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc.
Able to prioritize workload to maintain schedules on assigned projects.
Basic computer data entry skills required for use of maintenance and logistics databases.
Ability to communicate effectively, both verbally and in writing.

Experience & Education
Shall have five years of recent applicable aircraft maintenance experience.
Shall have at least one-year experience inspecting MDS aircraft assigned.
Shall possess a Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P). If no A&P, shall have a minimum five year experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting.
Shall hold a valid (current) FAA Inspection Authorization (IA). If no IA, shall have a minimum five-year experience as an aircraft inspector on the Mission Design Series (MDS) airframe they will be inspecting.
Five (5) or more years recent experience in relevant aircraft/systems.
A&P License/FAA Certification preferred.
Physical Requirements/Working Environment
Must be able to lift/push/pull minimum of 75 pounds.
Work may be outdoors in extreme weather conditions.
May be exposed to extreme noise from turbine and jet engine aircraft.
May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.
Will handle dirty parts and lubricants.
May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.
May work in maintenance shop or outside.


Travel
Travel between work locations may be required.

Salary Range: Neg-Neg
Relocation: n/a
Travel: n/a
Job Ident #: 1904537
Share
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2021 JSfirm