This is a very exciting opportunity to work with one of the worlds largest aerospace companies! The contracts are regularly extended, and direct opportunities are often available. ***MUST BE US PERSONS*** Assembler - Structures South Carolina
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Ability to select correct parts, materials, tools, assemblies, standards, hardware, etc. Drill, shim, install, fit, fasten, align, adjust and perform the necessary pre-installation assembly work to accomplish the installation of structural components requiring the use of production and engineering prints to determine exact locations. Report job constraints such as: errors caused by workmanship, defects in parts, materials, assembly procedures, tools, sequences, etc., in accordance with company procedures. Perform any repairs, rework, functional checks and the incorporation of authorized changes, etc., as outlined by Lead. Remove and/or replace installed components and any related parts. Must be able but not limited to Drill close tolerance holes in composites, Tool indexing, Gap measurement.
Ability to read and understand blueprints, drawings, schematics, engineering dispositions and instructions. Be safety conscious; employ the use of safety glasses, safety harnesses, respirators, boot socks, and other pertinent safety equipment 100 of the time. Exhibit exemplary housekeeping and Foreign Object Debris (FOD) standards. Maintain clean, neat, organized and FOD free work area. Possess understanding and knowledge of basic computer systems and programs. Ability stand for long periods of time, and work in elevated and/or confined spaces as required. Frequent overhead work may be required. Frequent overtime may be required.
Keywords: STRUCTURES, years of structures assembly experience must be noted on resume, assembly operations, structural and mechanical assemblies, subassemblies and aircraft systems, drill, shim, install, fit, fasten, align, adjust and pre-installation assembly work.
- Prior experience working with Structures
- Education from an aeronautical school/program* or equivalent industry experience
- Flexible to work any shift, 1st, 2nd or 3rd as business needs change
- 60 day separation is required for all returning contractors
Winter graduates of aeronautical programs (PIA, Embry Riddle, etc) will be considered and selected candidates will be scheduled to start after graduation date. Resume should clearly indicate School Name, Program and Graduation Date. If you are submitting a past worker, be sure to discuss whether they are familiar with this department and what related experience they have. Make sure to find out why they left their last assignment (Will they be in good standing?) and be sure that 60 days have passed between their last day and the first day of the new assignment.
Lift less than 25 pounds (Occasional lifting of 21-35 pounds), bend and twist at the waist, walk, crawl, crouch, stand for long periods, kneel, reach, climb/balance, flexion/extension
Contact with sealants and solvents, exposure to noise, working on elevated platforms
Use personal protective gear for face, eyes, ears, hand, and arms as required.
Pass visual acuity and color perception tests
Read, write, and comprehend the English language
Handle, use, and dispose of hazardous material
Obtain & maintain training certifications as required to support assignment responsibilities
Occasional (1 to 3 hrs) finger manipulation
On occasion, a 2-person lift may be necessary for weights greater than 50 lbs
Frequent reaching overhead (3 to 6 hrs)
Frequent walking on flat surfaces
Frequent standing flat or uneven surfaces
Frequent balancing on a ladder, steps, or uneven surfaces
Occasional climbing on 3-12 ft ladders or stands
Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls
Occasional contact with metals
Exposure to plastics and solvents to atmospheric conditions
Frequent exposure to noise
Assembly DAJXIB (D81)
Individual Contributor - B
Performs routine production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations.
Functional Excellence Competencies
Accountability and Responsibility
Demonstrates a willingness to accept responsibility and accountability for ones actions. Exhibits a moral, legal or mental accountability in areas of responsibility.
Maintains effectiveness when experiencing major changes in work tasks or the work environment; adjusts effectively to work within new work structures, processes, requirements, and/or cultures.
Encourages others to seek opportunities for different and innovative approaches to addressing problems and opportunities; facilitates the implementation and acceptance of change within the workplace.
Originates action to improve existing conditions and processes; uses appropriate methods to identify opportunities, implements solutions, and measures impact.
Demonstrates an interest in personal learning and development. Seeks feedback from multiple sources about how to improve and develop; modifies behavior based on feedback or self-analysis of past mistakes. Takes steps to develop and maintain the knowledge, skill, and ability to perform.
Innovation / Creativity
Discovers new opportunities and solutions for problems by looking beyond current practices and using innovative thinking. Tries different and novel ways to deal with work problems and opportunities.
Planning and organizing
Effectively plan what is to be achieved and involve all relevant stakeholders. Anticipate important or critical events, identifying resource requirements and assigning responsibility for specific work, including deadlines and performance expectations. Demonstrate the use of information -gathering techniques, analyzing situations and identifying implications in order to make correct decisions. Demonstrate ability to monitor progress and to make changes as required.
Strategic Decision Making
Obtains information and identifies key issues and relationships relevant to achieving a long-range goal or vision; commits to a course of action to accomplish a long-range goal or vision after developing alternatives based on logical assumptions, facts, available resources, constraints, and organizational values.
Demonstrates a commitment to the mission and motivation to combine the teams energy and expertise to achieve a common objective. Understands the dynamics of effective teamwork in order to attain higher levels of performance. Demonstrates ability to work as a member of a team.
Knowledge of assembly and production processes, manufacturing capabilities (e.g., composites, structures), and data needed for defining delivery configurations (e.g., design definition, program directives, engineering drawings, change memos, wiring diagrams and schematics, functional tests, supplier data). Ability to differentiate production (manufacturing) processes and requirements from in-service procedures and requirements.
Knowledge of function specific specialized tools (e.g., sheet metal--cornice brakes, metal shears, pneumatic rivet squeezers, cold-hardening kits; electrical--crimpers, wire routing tools, multimeters)
Certification & Qualification
Knowledge of verification, validation, certification and qualification processes and procedures, including knowledge of governing regulations and compliance requirements. Ability to assess and document test or analysis data to show compliance.
Engineering Drawings & Specs
Ability to read, understand, and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change, design).
General Shop Processes
Complete knowledge of shop processes to include Foreign Object Damage/Debris (FOD) prevention, material handling, safety, calibration requirements and Electrostatic Discharge (ESD).
Knowledge of Lean Manufacturing principles (e.g., value stream analysis, single piece flow).
Quality Systems Process
Knowledge of quality systems (e.g., inspection process, company quality procedures).
Ability to understand the big picture and the inter-relationships of all positions and activities in the system, including the impact of changes in one area on another area. This includes the ability to see and understand the inter-relationships between components of systems and plans, anticipate future events, and apply the principles of systems thinking to accelerate performance. Additional Skills:
|Skills: ||Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 1 or more years related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate). |
The Structures Company is a national staffing firm specializing in contract, contract to hire and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair and support staff. Our niche recruiting team is one of our biggest strengths and is the main reason we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests, while also providing industry leading customer service.
We support the majority of Aerospace OEMs and Tier 1 Suppliers across the United States.
We have a national medical, dental and vision plan with United Healthcare and we also have a 401K offering. In some states and on some openings there is bonus potential, sick pay and holiday pay for those who qualify.
The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)
The Structures Company is a national staffing firm specializing in contract, contract to hire, and direct hire placement opportunities. Our clients rely on us to support their engineering, IT, Production, Maintenance & Repair, and support staff. Our niche recruiting team is one of our biggest strengths and is why we are a top provider of talented professionals to the majority of our clients. They will help you identify the opportunity that best fits your interests while also providing industry-leading customer service. We support the majority of aerospace OEMs and tier 1 suppliers across the United States. The Structures Company LLC is an Affirmative Action/ Equal Opportunity Employer (or AA/ EOE)