Precision Air is hiring a Quality Assurance Manager for their site in Florence, SC. This position will report to the Repair Station Manager and will be responsible for the overall compliance with the Repair Station and Quality Control Manual (RSQCM), and the approved training program. In addition, the QA Manager is responsible for directing, planning, and laying out the details of inspection standards, methods, and procedures used by the repair station in complying with all applicable Federal Aviation Regulations, manufacturer's specifications and recommendations.

PRIMARY DUTIES & RESPONSIBILITIES:

• Responsible for the direct supervision and management of the Quality Assurance Department staff as applicable including the Chief Inspector, Inspectors, and Records Personnel.
• Assure all inspections are properly performed on all completed work and that the proper inspection records, reports, and forms used by the repair station are completed and executed prior to releasing the product for return to service.
• Approve implementation or changes to all forms and tags used by the repair station.
• Determine that all technical data on articles overhauled or repaired by the repair station are kept current with latest revisions. This data includes manufacturer's overhaul manuals, service bulletins, part specifications, related FAA approved data, and other technical data used by the repair station.
• Assure that periodic checks are made on all inspection tools and the calibration of precision equipment used by the repair station and technicians who keep their own precision equipment. Further assure that current records of those inspections and tests are maintained.
• Determine that no defective, unserviceable, or unairworthy parts are installed in any component or article released by the repair station.
• Submit reports of defects or unairworthy condition in accordance with 14CFR §145.221.
• Assure the proper execution of a maintenance release and/or FAA Form 337 when required.
• Assure that procedures used in procurement and reception of aircraft parts will guard against "bogus" and "unapproved" parts from entering the parts system and to ensure that any such parts are detected before their use.
• Oversee the preliminary, hidden damage, in-progress, and final inspections of all articles maintained by the repair station and the recording of results of such inspections.
• Oversee the proper tagging and identification of all parts and components as outlined in this manual.
• See that unairworthy parts are segregated and quarantined in such a way as to prevent their reuse as serviceable parts.
• Assure that all inspections are properly performed on all completed work before it is approved for return to service, and that the proper inspection and maintenance records, reports and forms required for each release are properly executed.
• Assure that the proper inspection records, reports, and forms used by the repair station are available to all inspection personnel.
• Maintain and keep current a regulatory library including federal aviation regulations, type certificate data sheets, and FAA published airworthiness directives.
• Compile completed work orders and inspection forms in such a manner that once filed information pertaining to a specific item can be readily located for review. 
• Assure that the technician responsible properly executes complete entries on forms and work orders used by the repair station.
• Ensure that any maintenance performed for 14 CFR 121, 125, 129 or 135 Carriers under a Continuous Airworthiness Program per 14 CFR 145.1 through 145.205 is accomplished in accordance with that Carriers manual and that all required inspection items are inspected by RII inspectors, not performing the work.
• Ensure that all regulations are followed as it relates to Contract Maintenance IAW 14 CFR 145.209 (h) & 145.217.
• Ensure that proper entries are made into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals.
• As applicable, serve as the International Organization for Standardization (ISO) Quality Manager, ensure compliance with the ISO-9001, Quality Management System (QMS) manual to include quality metrics related to maintenance and parts. Write quality escapes/corrective actions to eliminate future escapes. Assist in performance of internal audits and process improvement actions.

BENEFITS INCLUDE:
401(K) Plan with Employer Match, Health Insurance (medical, dental, and vision), Paid PTO, Flexible Spending Accounts (Health and Dependent Care), Life insurance, Short term and long-term disability, Full Holiday Schedule and more.

This company, its subsidiaries, and joint ventures will provide equal employment opportunities to all persons and prohibits employment decisions based on race, religion, color, creed, national origin, sex, age, disabling condition, political affiliation, protected veteran’s status, or sexual orientation. All selection, hiring, and promotion decisions will be based on valid job-related requirements consistent with performance of the essential functions of the position. This policy is in keeping with Executive Order 11246, as amended, Title IX of the Education Amendments of 1972, the Equal Pay Act of 1963, Sections 503 and 504 of the Rehabilitation Act of 1973, the Civil Rights Restoration Act of 1988, the Vietnam Veterans Readjustment Assistance Acts, as amended, and other applicable federal and state laws. Pursuant to PL 93-638, as amended, preference may be given qualified to the Corporation’s Shareholders, including their spouses and descendants, during the hiring process to the maximum extent permitted by law.

• FAA Airframe and Powerplant Certificate required, FAA Inspection Authorization - preferred
• 8 years of experience in an FAA Part 145 Certified Repair Station including progressive experience in supervisory and inspector roles.
• Technical degree in Aviation related field (degree may be offset by additional experience)
• Working knowledge of FAA and Federal Aviation Regulations pertaining to maintenance programs and procedures. Experience working with the FAA - preferred
• Computer skills necessary to learn and/or operate word processing, spreadsheet, database, and email. Experience in using aircraft maintenance planning software systems such as EBIS is highly desired.
• Working knowledge of process improvement methodology and application
• Verbal and written communication skills
• Business writing skills necessary to create various reports and correspondence
• Presentation skills necessary to effectively communicate, update, persuade, and/or facilitate discussions with all levels of management
• Planning and organizational skills necessary to prioritize, assign and coordinate workload of assigned area and employees with a multiple project setting
• Experience in ISO 9001 Quality Management System compliance – preferred
• GA and Corporate aircraft experience—Preferred.

PERSONAL ATTRIBUTES: 

The employee must maintain strict confidentiality in performing duties and consistently demonstrate the following personal attributes:

• Be honest and trustworthy
• Be respectful
• Possess cultural awareness and sensitivity
• Interpersonal skills necessary to work effectively with a variety of individuals, departments, organizations, and regulatory agencies
• Demonstrate sound work ethics

A competitive package of salary and benefits is available to the selected candidate.  The candidate will be expected to compete for promotional opportunities and to embrace challenging maintenance and modification activities for business category aircraft that are used in traditional commercial operations and those involved in government-related special missions.