NC Machine Operator / Archbald, PA
Lockheed Martin •
Position Type: Permanent
Job Description:
Description: Follows instructions to machine, fabricate, or assemble parts to print and operation sheet specifications using conventional, CNC, and sheet metal machines including saws, riveters, fasteners, setters, presses, spot welders, and hand tools including grinders, Helicoil installation tools, etc.
Interprets CAD data, prints and sketches with regard to fabrication and can follow written and/or verbal instructions
Performs secondary operations during the machine cycle such as deburring and straightening
Inspects parts as they are produced using standard gages, micrometers, indicators, vernier calipers, depth gages, and other measuring devices, to ensure conformity to specifications
Inspects cutting tools for wear to ensure the quality of parts, reports worn tools to the supervisor or set up person, and makes adjustments during production run as required to maintain quality parts and to keep the machine running
Maintains coolant levels to ensure a steady supply of coolant/cutting fluids to the machine
Maintains workstation/cell in organized manner and in compliance with any applicable safety standards
Receives and, when assigned, provides cross-training for other tasks related to department functions and procedures
Recommends and executes changes to achieve process improvements and/or cycle time reductions
Performs minor preventive maintenance to equipment
Works in time-critical situations in a dynamic, team-oriented environment where programs, setups, and tooling are constantly changing and interact effectively with associates & management as priorities shift
Performs other job-related duties as required by management
Physical condition allowing:
a. Lifting 50 pounds
b. Standing, sitting, bending, walking, 10+ hours per day
c. Personal protective equipment including Steel-toed shoes, safety glasses, hearing protection, and wearing a respirator when required
Selects and installs proper cutting tools, and zeroes in the machine to control. Shapes and installs proper cutting tools select proper tool offsets to meet quality standards and make other necessary setup adjustments
Selects and loads proper CNC program in machine control to insure proper operation of the machine
Inspects set up parts prior to submission to inspection for approval to the fullest and most practical extent possible
Investigates “out of specification” problems in machining processes and work with ME’s and programmers to resolve such issues
Provides technical support to Manufacturing personnel when necessary
Sets up CNC machines per blueprints or customer requirements
Verifies gages and inspection equipment required are correct and appropriate for the task
Verifies NC code during execution of setup
Pre-sets and installs proper cutting tools select proper speeds, feeds, and depth of cut where applicable to maintain the proper quantity and quality standards
Adheres to safety guidelines and the correct procedures for performing tasks to prevent personal injury or damage to product and/or equipment
Basic Qualifications:
• 2 years of experience or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and with demonstrated ability to meet production time standards with minimal defects
• Experience in set up of CNC machines per blueprints or customer requirements for low to mid complexity parts
• Proficient in use of measuring equipment and able to verify conformance of machined work piece to specifications
• Proficient in reading and understanding complex mechanical blueprints
• Experience in selection and installation of proper cutting tools, and zeroing the machine to control.
• Experience in shaping and installing proper cutting tools and selecting proper tool offsets to meet quality standards and make other necessary setup adjustments
This site requires special access so all candidates must be a US Citizen.
Desired Skills:
• Experience as CNC operator in multiple machine cellular manufacturing operation
• Experience in set up and operation of CNC horizontal machining centers and lathes
• Proficient with setups on both horizontal and vertical machines
• Experience pre-setting cutting tools and setting up fixtures in machines
• Proficient with editing CNC programs and using FANUC controls
• Experience working/machining steel, aluminum and stainless steel with knowledge of machining speeds and feeds required
• Proficient at GD&T
• Experience in set up and operation of one or more computer numerical controlled machining centers. Performing such operations as drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
• Experience programming with GibbsCAM
• Experience with Solid Modeling
• Ability to perform complex calculations related to machining
• Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, Microsoft Office
Clearance Level: None
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They’re dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin’s vast team works with partners around the world to bring proven performance to our customers’ toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
Experience Level: Hourly/Non-Exempt
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: No
Career Area: Manufacturing
Type: Full-Time
Shift: First
• Experience as CNC operator in multiple machine cellular manufacturing operation
• Experience in set up and operation of CNC horizontal machining centers and lathes
• Proficient with setups on both horizontal and vertical machines
• Experience pre-setting cutting tools and setting up fixtures in machines
• Proficient with editing CNC programs and using FANUC controls
• Experience working/machining steel, aluminum and stainless steel with knowledge of machining speeds and feeds required
• Proficient at GD&T
• Experience in set up and operation of one or more computer numerical controlled machining centers. Performing such operations as drilling, milling, boring, & tapping, etc. on any and all types of work within the scope of the machine
• Experience programming with GibbsCAM
• Experience with Solid Modeling
• Ability to perform complex calculations related to machining
• Knowledge of such tools as SAP, Command Media, Apriso, PAL, dPLM, Microsoft Office
Job Ident #:
62200884944
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)