RF Engineer, Sr Staff - Sensor Calibration - Dallas, TX

Job Description:

Description:Lockheed Martin is a global security and aerospace company that employs approximately 114,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration, and sustainment of advanced technology systems, products, and services. Lockheed Martin Missiles and Fire Control (MFC) is one of four Lockheed Martin business areas.

We are experiencing growth and looking for an RF Calibration Engineer to join our team in Dallas, TX.

The RF Seeker Calibration Engineer is responsible for the calibration, testing, characterization, and performance validation of Radio Frequency (RF) seekers used in radar-guided systems, such as missiles, drones, or other precision-guided munitions. This role ensures that RF seekers (active, semi-active, or passive radar homing systems) meet stringent accuracy, reliability, and performance requirements through precise calibration procedures, data analysis, and troubleshooting in laboratory, anechoic chamber, and field environments.

You will work closely with hardware design, systems engineering, signal processing, and test teams to support development, production, and sustainment of RF seeker technologies.

What You Will Be Doing

• Develop and Execute Calibration Procedures: Design, implement, and optimize calibration methods for RF seekers, including far-field and near-field calibration techniques, antenna pattern measurements, gain/phase calibration, and receiver/transmitter alignment.

• Perform Testing and Characterization: Conduct comprehensive RF testing using equipment such as network analyzers, spectrum analyzers, signal generators, power meters, and anechoic chamber facilities. Verify seeker performance parameters like sensitivity, dynamic range, beamforming accuracy, and target tracking.

• Data Analysis and Modeling: Analyze calibration data to identify discrepancies, model error sources (e.g., temperature effects, misalignment, delay variations), and develop compensation algorithms or lookup tables to improve seeker accuracy.

• Troubleshooting and Root Cause Analysis: Diagnose hardware, firmware, or software issues affecting seeker performance and collaborate on corrective actions.

• Support Production and Field Activities: Establish production calibration processes, train technicians, and support field deployments or flight testing as needed. Develop automated test scripts and calibration fixtures to improve efficiency and repeatability.

• Documentation and Compliance: Maintain detailed calibration records, generate reports and certificates, ensure compliance with standards (e.g., ISO/IEC 17025, MIL-STD), and contribute to technical documentation and configuration management.

• Innovation and Improvement: Research and evaluate new calibration technologies, tools, and methods to reduce time/cost while enhancing seeker performance. Support algorithm development for signal processing and calibration in radar seekers.

Travel up to 20 may be required.

Why Join Us

We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin’s comprehensive benefits package here.

Further Information About This Opportunity:

This position is in Dallas. Discover more about our Dallas, Texas location.
Basic Qualifications:
- Bachelors Degree in Electrical Engineering, RF/Microwave Engineering, Physics, or a related STEM field.

- 8+ years in RF engineering, radar systems, or calibration (experience with seekers, phased arrays, or radar hardware is highly desirable).

- Interim Clearance is needed to start, therefore you must be a US Citizen.

- Strong knowledge of RF/microwave principles, antenna theory, radar signal processing, and propagation.

- Proficiency with RF test equipment (VNA, spectrum analyzers, etc.) and calibration standards.

- Familiarity with anechoic chambers, OTA (over-the-air) testing, and environmental testing.
Desired Skills:
• Experience with missile or radar seeker systems (active/semi-active RF homing).

• Knowledge of phased array antennas, monopulse tracking, or electronic warfare techniques.

• Background in metrology, measurement uncertainty analysis, or automated calibration software (e.g., MET/CAL).

• Hands-on experience in RF over-the-air hardware-in-the-loop (HWIL) testing or flight test support.

-Active Top Secret Clearance.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Top Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the worlds most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.

With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.

If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Experienced Professional
Business Unit: MISSILES AND FIRE CONTROL
Relocation Available: Possible
Career Area: RF Engineering
Type: Full-Time
Shift: First

• Experience with missile or radar seeker systems (active/semi-active RF homing).

• Knowledge of phased array antennas, monopulse tracking, or electronic warfare techniques.

• Background in metrology, measurement uncertainty analysis, or automated calibration software (e.g., MET/CAL).

• Hands-on experience in RF over-the-air hardware-in-the-loop (HWIL) testing or flight test support.

-Active Top Secret Clearance.

Job Ident #: 95606640672

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/

Lockheed Martin Corporation is an American global aerospace, defense, security and advanced technologies company with worldwide interests. It was formed by the merger of Lockheed Corporation with Martin Marietta in March 1995. It is headquartered in North...

Benefits:
TBD

(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

Job Info

Location

Grand Prairie, Texas, United States

Type

Permanent

Company Details

Lockheed Martin

6801 Rockledge Dr
Bethesda, Maryland 20817 USA
www.lockheedmartinjobs.com/